Performance Evaluation of Dye-Sensitized Solar Cell Using Bougainvillea Flower Extract
Volume 9 Uyoyou Blessing Osolobri, Omamoke O. E. Enaroseha, Samuel Emuvokeraye Omoyibo
Published online:29 December 2023
Article Views: 20
Abstract
The readily availability of energy is the center on which all technology relies. The solar energy, being the mother of energy need, to be harness by various applications on which Dye-Sensitized Solar Cells (DSSCs) is a very cost-effective way to tap into this natural renewable energy. This study explores the viability of Bougainvillea flower dye extracts as sensitizers in DSSCs for efficient solar energy conversion. The study focuses on extracting dye compounds from Bougainvillea flowers and integrating them into DSSCs. The efficiency of these solar cells is evaluated through various parameters, including performance, stability, and photovoltaic characteristics. The energy conversion efficiencies of Bougainvillea flower were found out to be 0.13%. This phenomenon arises from the interaction between the carbonyl and hydroxyl groups of the anthocyanin molecule in dye extracts and the surface of the TiO2 porous film.
Reference
C. S. Ezike, G. Z. Kana, and A. Aina, “Progress and prospect on stability of perovskite photovoltaics,” Journal of Modern Materials, vol. 4, no. 1, pp. 16–30, 2017.
G. F. C. Mejica, R. Ramaraj, and Y. Unpapraom, “Maejo international journal of energy and environmental communication,” 2022.
R. Krishnamoorthy, S. Aswini, C. Guna et al., “Design and implementation of iot based energy management system with data acquisition,” in 2020 7th International Conference on Smart Structures and Systems (ICSSS). IEEE, 2020, pp. 1–5.
T. V. T. Nguyen, Y. Unpaprom, and R. Ramaraj, “Enhanced fermentable sugar production from low grade and damaged longan fruits using cellulase with algal enzymes for bioethanol production,” Emergent Life Sciences Research, vol. 6, pp. 26–31, 2020.
K. Sophanodorn, Y. Unpaprom, K. Whangchai, A. Duangsuphasin, N. Manmai, and R. Ramaraj, “A biorefinery approach for the production of bioethanol from alkaline-pretreated, enzymatically hydrolyzed nicotiana tabacum stalks as feedstock for the bio-based industry,” Biomass Conversion and Biorefinery, pp. 1–9, 2020.
R. Ramaraj, N. Dussadee, N. Whangchai, and Y. Unpaprom, “Microalgae biomass as an alternative substrate in biogas production,” International Journal of Sustainable and Green Energy. Special Issue: Renewable Energy Applications in the Agricultural Field and Natural Resource Technology, vol. 4, no. 1-1, pp. 13–19, 2015.
P. Bhuyar, S. Sundararaju, M. H. A. Rahim, R. Ramaraj, G. P. Maniam, and N. Govindan, “Microalgae cultivation using palm oil mill effluent as growth medium for lipid production with the effect of co 2 supply and light intensity,” Biomass Conversion and Biorefinery, vol. 11, pp. 1555–1563, 2021.
R. Ramaraj and Y. Unpaprom, “Enzymatic hydrolysis of small-flowered nutsedge (cyperus difformis) with alkaline pretreatment for bioethanol production,” Maejo International Journal of Science and Technology, vol. 13, no. 2, pp. 110–120, 2019.
I. M. Ezeh, O. O. Enaroseha, G. K. Agbajor, and F. I. Achuba, “Effect of titanium oxide (tio2) on natural dyes for the fabrication of dye sensitized solar cells,” Engineering Proceedings, vol. 63, no. 1, p. 25, 2024.
O. Ojegu and O. Omamoke, “Optical properties of the anatase phase of titanium dioxide thin films prepared by electrostatic spray deposition,” Nigerian Journal of Science and Environment, vol. 18, no. 2, p. 120, 2020.
B. O. Ogo, O. O. Enaroseha, O. O. Robert, E. O. Ojegu, I. L. Ikhioya, A. Ekpekpo, and O. Osiele, “Fabrication of dye-sensitized solar cells using nitrogen doped carbon quantum dots and organic dye extracted from purple cabbage,” International Journal of Advancement in Science and Technology, vol. 9, no. 2, p. 16, 2024.
U. O. Aigbe, R. B. Onyancha, K. E. Ukhurebor, B. Okundaye, E. Aigbe, O. O. Enaroseha, K. Obodo, O. A. Osibote, A. El Nemr, L. L. Noto et al., “Utility of magnetic nanomaterials for theranostic nanomedicine,” in Magnetic Nanomaterials: Synthesis, Characterization and Applications. Springer, 2023, pp. 47–86.
I. Enaroseha and Oyebola, “Rate equation analysis of the 2.9 µmholmium-doped potassium lead bromide (ho:kpb2br5) transition for diode laser application,” Transition forDiode Laser Application. Journal of the Nigerian Association of Mathematical Physsics, vol. 37, p. 301, 2016.
U. O. Aigbe, K. E. Ukhurebor, R. B. Onyancha, B. Okundaye, E. Aigbe, K. Obodo, E. O. Omamoke, L. L. Noto, A. O. Osibote, and H. I. Atagana, “Activated biosorbents for the removal of metals from aqueous solutions,” in Adsorption Applications for Environmental Sustainability. IOP Publishing Bristol, UK, 2023, pp. 3–1.
K. Sharma, V. Sharma, and S. Sharma, “Dye-sensitized solar cells: fundamentals and current status,” Nanoscale research letters, vol. 13, pp. 1–46, 2018.
W. Ghann, A. Rahman, A. Rahman, and J. Uddin, “Interaction of sensitizing dyes with nanostructured tio2 film in dye-sensitized solar cells using terahertz spectroscopy,” Scientific Reports, vol. 6, no. 1, p. 30140, 2016.
J. S. Lee, K. H. Kim, C. S. Kim, and H. W. Choi, “Achieving enhanced dye-sensitized solar cell performance by ticl4/al2o3 doped tio2 nanotube array photoelectrodes,” Journal of Nanomaterials, vol. 2015, no. 1, p. 545818, 2015.
Y. Qin and Q. Peng, “Ruthenium sensitizers and their applications in dye-sensitized solar cells,” International Journal of Photoenergy, vol. 2012, no. 1, p. 291579, 2012.
H. Zhou, M. Li, X. Zi, T. Xu, G. Hou et al., “Nutritive value of several tropical legume shrubs in hainan province of china,” Journal of Animal and Veterinary Advances, vol. 10, no. 13, pp. 1640–1648, 2011.
Enaroseha and S. I. Okunzuwa, “Synthesis and characterization of fe(iii) chitosan nanoparticles n – benzaldehyde schiff base for biomedical application,” Chemical Papers, vol. 78, no. 5, p. 3253, 2024.
To Cite this article
U. B. Osolobri, O. O. E. Enaroseha and S. E. Omoyibo “Performance Evaluation of Dye-Sensitized Solar Cell Using Bougainvillea Flower Extract,” International Journal of Applied and Physical Sciences, vol. 9, pp. 42-47, 2023. Doi: https://dx.doi.org/10.20469/ijaps.9.50005